Did you know that it’s actually 4 Colly Birds and not 4 Calling Birds in the 12 Days of Christmas song?! Yeah, me neither. But now that I’ve learned it, I will absolutely be super obnoxious at Christmastime and tell everyone I know. haha! Anyways, I am so happy to have finally, (finally!) finished designing all the birds of Christmas, and this Colly Bird is a free felt bird sewing pattern to complete the set!

This post contains affiliate links. Read more.
This stunning little Colly Bird freebie completes the set of Christmas birds I’ve been working on for ages! I’m so thrilled I finally got them all finished, and in plenty of time for the holiday crafting season! Who even am I?! lol
The set also includes:
Partridge (with a tiny pear accessory)
Turtle Dove
French Hen (with stylish scarf accessory)
Goose-a-laying (with optional rubber boots)
and a Swan-a-swimming
All of these birds are available individually if you prefer.
The Colly Bird is the simplest design of the group, and very beginner friendly in my opinion. He comes together in a matter of a couple of hours at most.
He, and all the birds for that matter, would be perfect as ornaments, arranged into a festive wreath, or tucked into some garland or a sprig of DIY felt mistletoe!
The free bird pattern download also comes with a stitch guide to help with all the stitches used.
Let’s get started!
Materials
Here’s what you’ll need to make one Colly Bird:
Printed Paper Pattern – find it at the bottom of the post
Black Felt – 6″ x 4.5″
Red Felt – 1.25″ x 3/4″
Yellow Felt – 1.5″ x 1/2″
Dark Grey Felt – Scrap
Matching Embroidery Threads in all four felt colours
Light/Medium Grey Embroidery Thread
Stuffing – I use a mix of polyfil and shredded felt scraps
Sewing Needle
Straight Pins
Tweezers – for stuffing the bird
Scotch Tape (optional)
Sewing Scissors
My favourite shop for buying good quality wool and wool-blend felt is Benzie Design. Pictured here, I’ve used the colours Black, Red, and Mustard. The grey beak was a little scrap from my stash that I can’t identify, but it’s pretty similar to Graphite.
Cutting out the Felt Bird Pieces
Follow the instructions on the PDF pattern page for cutting out the felt pieces. The SVG page has no text for reference.
For larger pieces, simply pin the paper template onto the felt and cut around it.
For smaller pieces, like the beak, you can either hold the paper in place or tape it to the felt with a piece of clear tape. Cut through the tape and felt at the same time, then gently peel the template off the felt.
My rule of thumb is, the smaller the pattern piece, the smaller the scissors you want to use. I use embroidery scissors for almost all my cutting.
You’ll need 2 body pieces in black, 2 wing shapes in black, 1 red wing detail, 1 yellow wing detail, and one dark grey beak.
The finished felt Colly Bird measures approximately 4″ x 2.5″
How to Make a Felt Bird
Step 1: Embellish the Wing
Use a single strand of matching red thread to stitch the red wing cap to a wing with a backstitch just along the bottom edge.
Place the yellow strip snugly up against the red cap and stitch it in place with a single strand of matching thread and a backstitch along the top and bottom edges.
Trim away any overhanging red or yellow felt to fit the wing more cleanly.

Step 2: Sew the Wing Together
Layer the wing front onto the wing back. Stitch around the red section with a single strand of matching thread and a blanket stitch. Switch to a single strand of yellow and do the two yellow sides.
Switch to two strands of black thread and finish sewing around the wing.
I opted not to stuff the wing because I wanted it to lie more flat against the bird body. Feel free to stuff the wing if you prefer.
Note: Photographing black thread on black felt is the most impossible thing. You’ll have to take my word for it that the stitching is present in the following photos. Feel free to send me your tips on getting good pics of black materials :p

Step 3: Attach the beak
Layer the front and back of the bird together. Position the beak in place and attach it through all the layers with a single strand of matching dark grey thread and a small blanket stitch.
Once the beak is sewn in place, add a single, long straight stitch down the middle of the beak.

Step 4: Embroider the eye
Note: I like to attach the beak first because it makes it much easier to position the eye correctly. A wonky eye can throw off the whole concept!
Move the back of the bird out of the way of your stitching.
Use two strands of light/medium grey thread to embroider the sleepy eye with a split stitch.
Storytime: The number one question I get asked about my animal designs is “Why are they all sleeping?”
I’ll tell you why. Because anytime I try to embroider an open eye, the animal looks completely deranged. Sleepy is safe. Sleepy is my signature. But if you feel confident to stitch a different style of eye, go for it!
You could also use a tiny safety eye if you’d prefer.

Step 5: Attach the wing
Again, move the back of the bird out of the way.
Use 2 strands of black thread to attach the wing to the body keeping the stitches invisible by hiding them under the wing.

Step 6: Join the bird together
Use 2 strands of black thread to join the front and back of the bird together with a blanket stitch.
Gently add some stuffing to the head and body as you work around, but don’t stuff the tail.
Note: If this felt Colly Bird is going to be an ornament, don’t forget to add a loop of string to the nape of the neck as you stitch around.

Just look at this cutie patootie! He’ll look really sharp against the green needles of a Christmas tree!

Free Felt Colly Bird Pattern
Here he is with his 12 Days of Christmas friends! The listing for the complete set of 6 birds is here. It includes the Colly Bird if you’d rather not sign up to the newsletter in order to get the pattern for free. 🙂



Here’s the sign-up box for the free bird pattern:
What else are you crafting this Holiday season?
xo

